Adjustable Track Bar

This is a must have when doing a Solid Axle Swap (SAS) on your 80-96 Bronco or for upgrading your 78-79 Bronco to an adjustable, heavy duty track bar. Designed to clear the engine cross-member on 80-96 trucks (using our Track Bar Bracket).  It provides adjustable length to work on a range of lift heights and to precisely dial-in the length for proper alignment of the truck.  Track bars provided per vehicle & lift are based on eye-eye lengths when using our FK rod ends. Track bar lengths provided are the lengths of the bar only, not including rod ends.  If you are providing your own rod ends, keep in mind other rod ends may have slightly different lengths which will effect the eye-eye length of the overall track bar.  Always ensure proper thread engagement of the rod ends in the track bar.  

Comes powder coated black using our 4 stage powder coat process.  Track bar threads are 7/8"-14tpi LH on the driver/frame side and 7/8"-14 RH on the passenger/axle side.

Optional FK Rod Ends:  Two high quality FK Rod Ends with jam nuts and misalignment spacers sized for the stock solid axle Dana 44.  Email us if you need a different configuration.  Rod ends provided with the selected 80-96 track bars are 7/8"-14LH, 2-5/8" ball, 3/4" bore for the driver/frame side and 7/8"-14RH, 1-5/8" ball 3/4" bore for passenger/axle side.  Rod ends provided with the selected 78-79 track bars are 7/8"-14LH, 1-5/8" ball, 5/8" bore for the driver/frame side and 7/8"-14RH, 1-5/8" ball 3/4" bore for passenger/axle side.  Note that the stock track bar bracket bolt size on the 78-79 trucks is 9/16", which is usually worn/wallowed out.  So the bracket will need to be drilled out to 5/8".  Select the appropriate Hardware option for the 5/8" bolt if that is desired. 

Optional Hardware:  For the 80-96 bars, a 3/4" x 5.5" (frame side) and 3/4" x 4.5" (axle side) Grade 8 bolts, washers and lock nuts can be added as an option if needed.  For the 78-79, a 5/8" x 3-1/2" (frame side) Grade 8 bolt, washers and lock nut can be added as well as a 3/4" x 4-1/2" (axle side) Grade 8 bolt, washers and lock nut if needed. Please email us if you need a different configuration.